Timeout On Slot 0 Port 0

Network devices have network interfaces, usually more than one. Routers can have literally hundreds and so can large switches. The Junos OS supports many types of interfaces. To understand the command used to configure a network interface carrying user traffic, it helps to have an overview of the options available in the set interface command in Junos.

One of the ways to explore the options available in set interface is to use the show interfaces terse command:

Let’s look at the Interface, Proto, Local, and Remote columns to understand what is needed to configure an interface.

The AP is connected to the WLC but keeps taking it's Raodio Down. As suggested I have played with the PoE settings to no avail. First introduced in 2008, USB 3.0 adds a new transfer mode called 'SuperSpeed,' (distinguishable from USB 2.0 by either the blue colour of the port or the initials SS) as well as this: Since USB 2.0 and USB 3.0 ports may coexist on the same machine and they look similar, the Standard-A USB 3.0 connector has a blue insert (Pantone 300C color). Set hint.ahci.0.msi='0' Also Set hint.ahcich.0.satarev='2' I have tried other HDDs and all the settings in BIOS It boots only on Legacy setting. Still same problem. When installing pfSense 2.3.3 I get ahcich timeout in slot. And CAM status: command timeout Any help?

Interface types and their abbreviations

All of the interface types supported in Junos have a two-letter text identifier. Some of the most often used supported interface types are:

Interface TypeInterface Text Identifier
ATM over SONET/SDHAt
Encryption ServicesEs
Fast EthernetFe
Gigabit EthernetGe
Loopbacklo0
Router internal interface for out-of-band managementfxp0
Router interface for internal managementfxp1
SerialSe
Services for ES and AS PICsSp
SONET/SDHSo
T1t1

The numbers following the interface type (such as ge-) refer to the chassis slot, processor, and port on which the interface is sending and receiving bits.

The Local column in the output lists the interface addresses. You set the protocol supported on the interface with the family keyword, and the protocol can be one or more of the more common families such as these (this is not an exhaustive list):

The world's most trusted Texas hold'em poker odds calculator. Improve your poker or find out just how bad that bad beat was. Poker odds calculate the chances of you holding a winning hand. Texas holdem hand probability calculator.

Com Port 0

  • inet: For IPv4. Specify a 32-bit IPv4 prefix, followed by a slash and the prefix length.

  • inet6: For IPv6. Specify a 64-bit IPv6 prefix, followed by a slash and the prefix length.

  • iso: For interfaces that need to support CLNS, which is the ISO network layer service protocol that is used by IS-IS. You also need to configure one or more addresses on the router’s loopback (lo0) interface, which IS-IS uses for its interface addresses.

  • mpls: For interfaces that need to send and receive Multiprotocol Label Switching traffic. You don’t need to configure an address for this protocol.

The “family” refers to the type of frame content that the (logical) interface must look for when deciding how to process the bits. What looks like an IPv4 packet with an error, for example, may be a perfectly valid MPLS data unit.

You assign an IPv4 address to a Gigabit Ethernet interface, as follows:

Play your favorite fun online slots for free with great bonus rounds! No download and no registration to play free slot machines online or download our mobile casino app to play anywhere. Hollywood Casino offers the same slot machine games from our Casinos to play online. Play 80+ FREE slot machine games online! Have fun with free slots and earn rewards points for casinos across the US. No Download & No deposit Required. /hollywood-casino-online-slots/. Play Hollywood Casino Free Slots Online. Receive 50,000 Free Credits to Play Real Vegas Style Slot Machines with bonus rounds and bonus features.

It’s worth seeing how the address displays in the configuration file because this configuration snippet visually shows the different sections of the interface configuration by the layers of indentation:

In this example, the IPv4 address 192.168.10.40/24 is assigned to the first connector on the third processor of the board in the third chassis slot (1/2/0 — computers always start counting with 0, as though the first day of the month were October 0).

Hi. i am trying to get some stuff out off a old dtf2 tape with a GY-8240FC tape drive and a atto fc controller.
under boot i can se that the tape drive is found i can also se link on both tape drive and controller but after boot link disapears from the controller
i have installed atto Celerity driver and config tool. i have also updated bios on the controller.

Time Out On Slot 0 Port 0 15


cat /var/log/dmesg
celerityfc: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
celerityfc 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10Timeout On Slot 0 Port 0
IRQ 10/celerityfc_00: IRQF_DISABLED is not guaranteed on shared IRQs
celerityfc: Event: Adapter Number 1.
Adapter Initialization Complete.
PCI Bus 0x00, Device 0x07, Function 00.
Driver version 2.70.
scsi2 : ATTO Celerity Fibre Channel Adapter (Bus 0x00, Device 0x38, IRQ 0x0B) Driver version 2.70 Firmware version 04.00.02
celerityfc: Found 1 adapters.
i then tryed

Time Out On Slot 0 Port 00


# ls /sys/class/fc_host/
host2
# echo 1 >/sys/class/fc_host/host2/issue_lip
Time out on slot 0 port 0 error#
# echo - - - >/sys/class/scsi_host/host2/scan
#
# cat /proc/scsi/scsi
Attached devices:
#
its like FC channel is not connected ?

Connection Timeout 0

Best regards Gorm